| Battery & operator identification / QR / passport link (Annex XIII) | Mandatory for EU passport-scoped batteries (> 2 kWh industrial / EV / LMT); N/A to lab 18650 cell | data/SOURCE.json (Sandia SNL_18650_NMC_25C_0-100_0.5-2C_a, LG Chem 18650HG2) | bess-evidence-lab-mvp metadata + asset_attribution guard | DESCRIPTIVE_ONLY | Commercial EU operator ID, batch/serial EU DPP UID, manufacturing plant & CE/conformity declarations | Economic Operator / Cell Manufacturer |
| Rated & remaining usable capacity / capacity retention (Annex VII) | Applicable technical health parameter (here demonstrated at 18650 lab cell level) | data/raw/cell.csv (cycles 10-14 vs 100-104 Discharge_Capacity Ah) | bess-evidence-lab-mvp/verifier/verify.py (median retention = 92.548%) | VERIFIED | System-level pack/plant scaling, calendar rest protocol, standardized EU capacity-test ambient controls | Independent Verifier (telemetry) + Economic Operator (nameplate/protocol) |
| Energy throughput & cycle count history (Annex VII) | Applicable technical usage parameter | data/raw/cell.csv (Cycle_Index, Charge/Discharge_Energy Wh, Charge/Discharge_Capacity Ah) | sandia_adapter cycle-log aggregator (660 recorded rows; outlier cycle 4 flagged) | VERIFIED | Verification of cycle-4 raw cycler anomaly (5.767 Ah vs ~2.93 Ah nominal) | Independent Verifier + Test Lab |
| Round-trip energy efficiency (RTE) at system AC boundary (Annex VII) | Applicable where applicable to stationary / industrial storage | Cell-level Wh only; no inverter, auxiliary load, or AC PCC meter | None (blocked by boundary check) | UNAVAILABLE | System PCS AC, auxiliary loads, PCC metering, standardized RTE test protocol | EPC / System Integrator / Economic Operator |
| Internal resistance & power fade (Annex VII) | Applicable Annex VII state-of-health indicator | No DCIR / HPPC pulse measurement column in cell.csv | Not executed (experimental resistance models excluded without DCIR telemetry) | UNAVAILABLE | Timestamped pulse-resistance / EIS / DCIR test records | Test Lab / BMS / Economic Operator |
| Negative events (deep discharge, extreme T, faults) (Annex VII) | Applicable lifecycle event log | Min/Max cell voltage (1.998-4.200 V) in cell.csv; nominal 25 C chamber metadata only | sandia_adapter voltage-bound check (flags cycle-4 5.767 Ah artifact & V_min=1.998 V) | DESCRIPTIVE_ONLY | Per-second temperature time-series, BMS fault/alarm registers | Economic Operator / BMS Owner |
| Remaining useful life (RUL) estimate | Supporting lifecycle indicator (not a measured physical constant) | Single cell trajectory only; no validated target-population conformal calibration | volmax-uq-bess-audit (EXCLUDED as experimental for single-cell dossier) | NOT_DEMONSTRATED | Validated population calibration & target operating-profile equivalence | Independent Verifier / Modeling Team (if validated) |